Sponsors |
|
|
|
|
Water For Cars
George Grimes
bk
Build and install a low-cost alternative method for running your vehicle (
internal combustion engine) on tap water, using off-the-shelf components.
This is simply an efficient way to convert ordinary tap water into gaseous
hydrogen and oxygen, and then burn these vapors in the engine, instead of
gasoline.
This "minisystem" runs easily from your existing battery and electrical
system, and it plugs into your carburetor with simple off-the-shelf fittings.
You will be installing a plastic water tank, a control circuit, a reaction
chamber, a hi-pressure carb/FI fitting, and 3 gauges, and then hooking into
your existing carb/FI.
The simplicity comes from its being an "on-demand" system requiring no fancy
storage or plumbing. You crank the gas pedal or throttle, and you
electrically create more vapor for immediate consumption, on demand; low-high
flow rate as needed, from idle to maximum power. The only real change is that
you are using tap water as fuel, instead of the traditional petroleum-based
fuel.
Given a choice, which way would you choose?
http://tinyur.com/6zt9kx
Article submitted Thursday, July 17, 2008
This article has been viewed 0 times.
Most Popular |
|
|
|